Ookla Report Reveals Why Your Indoor Mobile Signal Is So Bad

Share

- Advertisement -

Indoor mobile signal is a common frustration for smartphone users, particularly in busy cities where network coverage can be surprisingly unreliable. Whether you’re struggling to make a phone call, load a webpage or stream a video, moving indoors can sometimes make an already weak connection considerably worse.

However, the problem might not be your building’s walls or construction materials. A new study from network intelligence company Ookla suggests that poor outdoor mobile coverage is the biggest reason people experience weak signals inside buildings.

The research compared indoor and outdoor mobile signal measurements across more than 100 cities worldwide. Its findings point to a noticeable difference between regions, with North America, Europe and Oceania recording some of the weakest indoor mobile signals.

Interestingly, the study also challenges the common assumption that thick concrete walls and modern building materials are primarily responsible for poor indoor connectivity. While construction materials do affect signal strength, Ookla’s findings suggest that the quality of the surrounding mobile network matters considerably more.

For smartphone users, this means the solution may have less to do with changing buildings and more to do with how mobile operators design and maintain their networks.

North America and Europe struggle with weaker indoor mobile signals

According to Ookla’s research, cities across North America and Europe generally perform worse than several major Asian and Middle Eastern cities when it comes to indoor 4G signal strength.

- Advertisement -

The difference becomes particularly noticeable when looking at median signal measurements.

Cities such as Dubai, Bangkok and Seoul recorded median indoor 4G signal levels of approximately -88 dBm. Meanwhile, Naples recorded around -105 dBm, while Geneva and Birmingham registered approximately -104 dBm.

These numbers might look confusing because a lower negative value does not represent a stronger connection. In fact, mobile signal strength is generally better when the measurement is closer to zero.

For example, a signal of -88 dBm is considerably stronger than one measuring -105 dBm.

The difference of around 17 dB represents approximately 50 times the signal power, highlighting just how significant the gap can be between cities.

The broader regional figures tell a similar story. North American cities recorded a median indoor signal strength of approximately -101 dBm, while European cities averaged around -100 dBm.

- Advertisement -

East Asian cities performed considerably better, with a median reading of approximately -90 dBm.

This suggests that indoor connectivity problems are not evenly distributed across the world. Where you live and how well your local mobile network is designed can have a major influence on the signal your smartphone receives.

Building materials are not the biggest reason for poor reception

One of the more interesting findings from the Ookla study concerns the role of building construction.

It is easy to assume that concrete walls, thick insulation and modern construction materials are responsible whenever a smartphone loses signal indoors. These materials can certainly weaken radio signals, but the research suggests their overall impact is relatively limited compared with outdoor network quality.

Ookla found that timber framed buildings reduced signal strength by approximately 2 dB, while concrete buildings caused a reduction of around 7 dB.

Across the buildings studied, the median signal reduction was approximately 4 dB.

- Advertisement -

That is a meaningful difference, but it does not explain most of the variation in indoor mobile coverage between cities.

According to the report, building materials account for less than 10% of the overall difference in indoor signal strength across different cities and regions.

More importantly, approximately 85% of the variation comes down to the quality of the outdoor mobile signal.

This means a smartphone that already struggles to receive a strong signal outside is likely to experience even greater difficulties once its user enters a building.

In other words, the walls might make the problem worse, but the underlying network coverage is often the bigger issue.

This also explains why some cities offer reliable indoor connectivity despite having large commercial buildings and dense urban environments. Their mobile infrastructure provides a stronger signal before it even reaches the building.

How mobile operators could improve indoor coverage

If poor outdoor coverage is responsible for most indoor connectivity problems, mobile operators will need to look beyond simply improving reception inside individual buildings.

Ookla suggests that network providers should reconsider how they deploy their infrastructure, particularly in densely populated urban areas.

One possible solution is installing more mobile network equipment. A denser deployment of cellular masts and other network infrastructure could help improve coverage in areas where existing signals are weak.

Mobile operators could also make better use of available spectrum or adjust how their networks are configured to improve signal distribution.

These changes could make a noticeable difference in areas where users frequently experience dropped calls, slow data speeds and unreliable indoor connectivity.

However, improving coverage is not entirely within the control of network operators.

Government policies and local infrastructure regulations can influence how quickly mobile networks expand. Ookla points out that cities and countries with specific requirements for indoor coverage generally tend to perform better than those without such rules.

This suggests that better coordination between governments, regulators, building developers and mobile operators could help address the problem.

Indoor connectivity is becoming increasingly important as people rely on smartphones for work, entertainment, communication and everyday services. Weak coverage inside offices, shopping centres, apartments and public buildings can affect far more than just mobile internet speeds.

For users, the findings also offer a useful explanation for why buying a more expensive smartphone does not necessarily solve poor reception. A better device may improve how efficiently it receives available signals, but it cannot compensate entirely for inadequate network infrastructure.

Ultimately, mobile operators need to deliver stronger coverage across entire urban areas rather than expecting smartphone users to solve connectivity problems themselves.

Ookla’s findings make one thing particularly clear: if your phone struggles to maintain a connection indoors, the building itself might not be the main culprit. The real problem could be the mobile network outside.

Follow TechBSB For More Updates

- Advertisement -
Emily Parker
Emily Parker
Emily Parker is a seasoned tech consultant with a proven track record of delivering innovative solutions to clients across various industries. With a deep understanding of emerging technologies and their practical applications, Emily excels in guiding businesses through digital transformation initiatives. Her expertise lies in leveraging data analytics, cloud computing, and cybersecurity to optimize processes, drive efficiency, and enhance overall business performance. Known for her strategic vision and collaborative approach, Emily works closely with stakeholders to identify opportunities and implement tailored solutions that meet the unique needs of each organization. As a trusted advisor, she is committed to staying ahead of industry trends and empowering clients to embrace technological advancements for sustainable growth.

Read More

Trending Now